Joining metal and textiles without adhesives

A solid-state laser structures the aluminum surface for a better adhesion to the nonwoven fabric. (Photo: LZH)

LZH | Today, metal-textile hybrid materials are being used in many different areas. At the moment, however, these materials are relatively expensive and not always available in a sufficient quantity. In order to optimize metal-textile hybrid materials for widespread industrial use, the LZH is currently working on an adhesive-free process.

The textile part to be joined is a thermoplastic, nonwoven fabric with polyester fibers with a low melting temperature. First, a solid-state laser roughens the surface of the metal sheet. Then the metal sheet is heated and joined to the textile material. The thermal energy melts the polyester fibers, allowing for a hybrid connection between the metal and the textile.

This joint provides a much higher adhesive strength than conventional bonding using adhesives. However, the process is currently still in the trial stage. Ultimately, the project partners plan on structuring the sheet metal directly from the coil using the laser.

by Marius Lammers and Silke Kramprich

Image gallery for this article

  • A solid-state laser structures the aluminum surface for a better adhesion to the nonwoven fabric. (Photo: LZH)
  • The roughened aluminum surface is clearly visible in an SEM-image. (Photo: LZH)
  • In the future, metal-textile composites shall be produced directly from the coil. (Grafik: STFI. Projekt MeTexCom2, IGF-Vorhabennr. 157 RBG)
This website uses cookies to provide you with the best possible functionality. You agree to the use of cookies by using our website without changing your preferences. (Data Protection)